Site Preparation
- The area to be paved is cleared of any debris, vegetation, or existing pavement.
- The subgrade is prepared and compacted to provide a stable base for the asphalt.
Grading and Sloping
- The site is graded to ensure proper drainage, with the desired slope for water runoff.
Installing a Subbase
- A layer of aggregate material, known as the subbase, may be added to further support the asphalt layer.
Asphalt Mixture
- Hot-mix asphalt is the most common type used for paving. It consists of asphalt binder and a mix of coarse and fine aggregates.
- The asphalt mixture is produced at an asphalt plant and transported to the construction site.
Paving Process
- The asphalt mixture is spread and leveled using a paving machine.
- The material is compacted with heavy rollers to achieve the desired density and smoothness.
Surface Finishing
- Depending on the project specifications, the surface may undergo additional finishing processes, such as adding a seal coat or applying a surface treatment.
Curing and Cooling
- The freshly laid asphalt needs time to cool and cure. This process is crucial for the asphalt to harden and achieve its desired strength.
Striping and Marking
- Once the asphalt has cured, striping and marking are applied for traffic control and other necessary markings.
Regular Maintenance
- Regular maintenance, such as crack sealing and periodic resurfacing, helps prolong the lifespan of the asphalt surface.
It’s important to note that proper design, construction, and maintenance are essential for the longevity and performance of asphalt surfaces. Additionally, climate conditions and traffic loads should be considered during the planning and construction phases to ensure a durable and functional pavement.
Recent Work:
